Self Cleaning Grate Magnetic Separator

15层抽屉式永磁除铁器

自动清理型永磁除铁器-气动刮环型-1

图片4---

永磁除铁器14台

微信图片_20221201121054

微信图片_20221201121027

넳 넲

is similar to the traditional drawer-type permanent magnet iron remover. Flanges, metal throat hoops, silicone hoses and the like can be connected to the production line pipes. Materials can be removed from top to bottom through free fall through the permanent magnet iron remover.

is used to clean the magnetic material, the solenoid valve is energized, the cylinder pushes out the magnetic rod, and the PTFE blade on the magnetic rod scrapes the magnetic foreign material to the non-magnetic area at the end of the magnetic rod and falls into the external magnetic material discharge pipe; the solenoid valve is de-energized, The cylinder returns the magnetic rod to the overcurrent channel, and the magnetic material cleaning is completed.

characteristics

1. Magnetic cleaning is simple and efficient. This equipment uses PTFE scraper to imitate the magnetic objects adsorbed on the surface of the magnetic rod manually wiped. Compared with the traditional drawer-type permanent magnet iron remover, the time for cleaning magnetic objects is shortened to 10-15 seconds each time. The solenoid valve is energized, and the cylinder can complete the cleaning of magnetic objects with a push and pull of the drawer magnetic rod;

2. This equipment is especially suitable for high-altitude installation and manual cleaning is difficult to reach. The solenoid valve control switch can be installed on the ground and the control switch can be operated during cleaning;

3. If the PLC electric control box specially designed by our company is selected, unattended automatic demagnetization on the production line can be realized, and the demagnetization time can be set according to the process requirements;

4. This equipment is single-layer or multi-layer equipment. It is recommended to have 3 layers or more to improve the iron removal efficiency. A single equipment can reach up to 12 layers, and multiple magnetic rod layers can be realized in series;

5. The drawer door panel adopts foamed silicone rubber strip, and the cylinder is pressed and sealed. After the solenoid valve is powered off, the magnetic rod is automatically pushed back to the flow channel to ensure the sealing of the material pipeline;

6. The pipeline connection can be designed according to the customer's requirements, and the customer's on-site surveying and mapping can be carried out and the design scheme can be provided;

7. ETFE/PTFE can be sprayed on the flow channel according to customer requirements with a thickness of 0.2-0.3mm to reduce the risk of introduction of magnetic foreign matter at the back end.